Jan 3, 2024
Always use caution when operating a laser system. The BOSSLASER LS Series Laser Systems are a Class 4 laser product, as defined in International Standard IEC 60825-1. This laser machine is a Class IV…
Before laser processing material, you will need to load material into the laser system and then auto-focus the laser assembly system onto the top surface of the material. Be sure…
Using Illustrator, we can prep our vector file for use in LightBurn. Using LightBurn we can prep the vector file for the laser cutter. LightBurn Laser Cutter Software Tutorials (Online)
Using LightBurn, the Boss laser systems can operate in one of a variety of cutting modes. Vector cutting depth and raster engraving depth (or marking intensity if you are surface…
Selecting the Laser Cutter Machine in LightBurn Initially, after your first log-in on a machine you may be required to select the laser cutter from the installed USB devices on…
Fume Extraction for the Boss Laser Cutter System Before turning on the Boss Laser Cutter System, be sure that the main Fume Extraction Air Handling System is operating properly and running. In…
Jan 2, 2024
Lifting the Laser Cutter Bay Door Always wait until the cutting material off gasses and the smoke clears from the cutting chamber before opening the door (approximately 3-5 minutes). FAILURE…
Laser cutting is a fabrication process that uses a thin, focused, laser beam to cut and etch materials into custom designs, patterns, and shapes as specified by a designer. This…
Laser Cutter – Material Substrate Sizes Precut your material substrate or use scrap material that will fit appropriately within the honeycomb cutting bed.
The following are suggested laser cutter configuration settings for various materials. There are three Boss laser cutters available in Leazar Hall 220A, next to the Materials Lab, and two Boss…
TOP LINKS