Laser Cutters
Laser Cutter – Material Substrate Sizes
Laser Cutter – Material Substrate Sizes
Precut your material substrate or use scrap material that will fit appropriately within the honeycomb cutting bed.
- BOSS LS-2440
- located in Leazar Materials Lab
- 24” x 40” (990mm x 600mm) cutting area
- .BOSS LS-1630
- located in Lampe Digital Fabrication Studio MakerSpace
- 16” x 30” (750mm x 400mm) cutting area
- .The Z axis movement is up to 8” for taller objects and the machines are equipped with a 65W laser Tube.
- Do not exceed parts higher then 8” or you may obstruct and damage the laser cutter assembly.
- Do not attempt to force deeper cuts by reducing the laser cutter speed to the lowest speed and increasing the power to the highest power- cut your material based on proper laser cutter recommendations for that substrate.
- Categories:
