{"id":525,"date":"2024-01-02T20:02:13","date_gmt":"2024-01-02T20:02:13","guid":{"rendered":"https:\/\/design.ncsu.edu\/operations\/?p=525"},"modified":"2024-01-02T20:02:14","modified_gmt":"2024-01-02T20:02:14","slug":"laser-cutter-material-substrate-sizes","status":"publish","type":"post","link":"https:\/\/design.ncsu.edu\/operations\/525\/laser-cutter-material-substrate-sizes\/","title":{"rendered":"Laser Cutter &#8211; Material Substrate Sizes"},"content":{"rendered":"\n\n\n\n\n<h2 class=\"wp-block-heading\">Laser Cutter &#8211; Material Substrate Sizes<\/h2>\n\n\n\n<p>Precut your material substrate or use scrap material that will fit appropriately within the honeycomb cutting bed.<\/p>\n\n\n\n<ul id=\"yui_3_17_2_1_1694443747194_60\" class=\"wp-block-list\">\n<li><strong>BOSS LS-2440<\/strong>\n<ul class=\"wp-block-list\">\n<li>located in Leazar Materials Lab<\/li>\n\n\n\n<li>24\u201d x 40\u201d (990mm x 600mm) cutting area<\/li>\n<\/ul>\n<\/li>\n\n\n\n<li>.<strong>BOSS LS-1630<\/strong>\n<ul class=\"wp-block-list\">\n<li>located in Lampe Digital Fabrication Studio MakerSpace<\/li>\n\n\n\n<li>16\u201d x 30\u201d (750mm x 400mm) cutting area<\/li>\n<\/ul>\n<\/li>\n\n\n\n<li>.The Z axis movement is up to 8\u201d for taller objects and the machines are equipped with a 65W laser Tube.\n<ul class=\"wp-block-list\">\n<li>Do not exceed parts higher then 8\u201d or you may obstruct and damage the laser cutter assembly.<\/li>\n\n\n\n<li>Do not attempt to force deeper cuts by reducing the laser cutter speed to the lowest speed and increasing the power to the highest power- cut your material based on proper laser cutter recommendations for that substrate.<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n","protected":false,"raw":"<!-- wp:ncst\/dynamic-header {\"block\":\"ncst\/default-post-header\"} -->\n<!-- wp:ncst\/default-post-header {\"displayCategoryID\":44,\"showAuthor\":false,\"showReadingTime\":false} \/-->\n<!-- \/wp:ncst\/dynamic-header -->\n\n<!-- wp:heading -->\n<h2>Laser Cutter - Material Substrate Sizes<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Precut your material substrate or use scrap material that will fit appropriately within the honeycomb cutting bed.<\/p>\n<!-- \/wp:paragraph -->\n\n<!-- wp:list -->\n<ul id=\"yui_3_17_2_1_1694443747194_60\" class=\"wp-block-list\"><!-- wp:list-item -->\n<li><strong>BOSS LS-2440<\/strong><!-- wp:list -->\n<ul class=\"wp-block-list\"><!-- wp:list-item -->\n<li>located in Leazar Materials Lab<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<li>24\u201d x 40\u201d (990mm x 600mm) cutting area<\/li>\n<!-- \/wp:list-item --><\/ul>\n<!-- \/wp:list --><\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<li>.<strong>BOSS LS-1630<\/strong><!-- wp:list -->\n<ul class=\"wp-block-list\"><!-- wp:list-item -->\n<li>located in Lampe Digital Fabrication Studio MakerSpace<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<li>16\u201d x 30\u201d (750mm x 400mm) cutting area<\/li>\n<!-- \/wp:list-item --><\/ul>\n<!-- \/wp:list --><\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<li>.The Z axis movement is up to 8\u201d for taller objects and the machines are equipped with a 65W laser Tube.<!-- wp:list -->\n<ul class=\"wp-block-list\"><!-- wp:list-item -->\n<li>Do not exceed parts higher then 8\u201d or you may obstruct and damage the laser cutter assembly.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<li>Do not attempt to force deeper cuts by reducing the laser cutter speed to the lowest speed and increasing the power to the highest power- cut your material based on proper laser cutter recommendations for that substrate.<\/li>\n<!-- \/wp:list-item --><\/ul>\n<!-- \/wp:list --><\/li>\n<!-- \/wp:list-item --><\/ul>\n<!-- \/wp:list -->"},"excerpt":{"rendered":"<p>Laser Cutter &#8211; Material Substrate Sizes Precut your material substrate or use scrap material that will fit appropriately within the honeycomb cutting bed.<\/p>\n","protected":false},"author":391,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"source":"","ncst_custom_author":"","ncst_show_custom_author":false,"ncst_dynamicHeaderBlockName":"ncst\/default-post-header","ncst_dynamicHeaderData":"{\"showAuthor\":false,\"showDate\":true,\"showFeaturedVideo\":false,\"showReadingTime\":false,\"displayCategoryID\":44}","ncst_content_audit_freq":"","ncst_content_audit_date":"","ncst_content_audit_display":false,"ncst_backToTopFlag":"","footnotes":""},"categories":[44],"tags":[46,45],"class_list":["post-525","post","type-post","status-publish","format-standard","hentry","category-laser-cutters","tag-boss-laser","tag-laser-cutters"],"displayCategory":{"term_id":44,"name":"Laser Cutters","slug":"laser-cutters","term_group":0,"term_taxonomy_id":44,"taxonomy":"category","description":"","parent":0,"count":17,"filter":"raw"},"acf":{"ncst_posts_meta_modified_date":null},"_links":{"self":[{"href":"https:\/\/design.ncsu.edu\/operations\/wp-json\/wp\/v2\/posts\/525","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/design.ncsu.edu\/operations\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/design.ncsu.edu\/operations\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/design.ncsu.edu\/operations\/wp-json\/wp\/v2\/users\/391"}],"replies":[{"embeddable":true,"href":"https:\/\/design.ncsu.edu\/operations\/wp-json\/wp\/v2\/comments?post=525"}],"version-history":[{"count":2,"href":"https:\/\/design.ncsu.edu\/operations\/wp-json\/wp\/v2\/posts\/525\/revisions"}],"predecessor-version":[{"id":543,"href":"https:\/\/design.ncsu.edu\/operations\/wp-json\/wp\/v2\/posts\/525\/revisions\/543"}],"wp:attachment":[{"href":"https:\/\/design.ncsu.edu\/operations\/wp-json\/wp\/v2\/media?parent=525"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/design.ncsu.edu\/operations\/wp-json\/wp\/v2\/categories?post=525"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/design.ncsu.edu\/operations\/wp-json\/wp\/v2\/tags?post=525"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}